9 Best Mini Splits for Mobile Homes (November 2026)
The best mini splits for mobile homes include the Rellytech Mini Split AC/Heating System for most mobile home rooms, the MEPTY 12000BTU Mini Split AC/Heating System for larger mobile home living areas, and the Senville LETO 12000 BTU for cold-climate mobile homes.
On this page (9 sections)
- The best mini splits for mobile homes, by room and need
- How these mini splits compare
- How we compared these mini splits for mobile homes
- What size mini split fits a mobile home?
- Which voltage does a mobile home mini split need?
- How cold can a mobile home mini split run?
- Can you install a mini split in a manufactured home?
- Which mini split is best for a mobile home bedroom?
- The verdict: the best mini split for mobile home rooms
The best mini split for mobile home rooms is the Rellytech Mini Split AC/Heating System, a 9,000 BTU 115V inverter unit rated at 19 SEER2 that covers up to 550 sq. ft. If your main living area is larger, the MEPTY 12000BTU Mini Split AC/Heating System handles up to 750 sq. ft on the same 115V supply.
Mobile homes have quirks that change the shopping list. Walls are thin, rooms are narrow, and the electrical panel may not have much spare capacity.
A ductless system avoids ductwork you can't fit, but you still need to match BTU to the room, check the voltage, and know how cold your winters get.
This guide compares nine systems sold for manufactured homes. Each pick has a clear job: a small bedroom, a long living area, a cold climate, or a home that only has 220V service.
For a broader look at brands, read our guide to the best mini split brands for home use.
Our picks at a glance
-
1
Best for most mobile home roomsRellytech Mini Split AC/Heating System
9.7/10 our score
See it on Amazon -
2
Best for larger mobile home living areasMEPTY 12000BTU Mini Split AC/Heating System
9.0/10 our score
See it on Amazon -
3
The best mini splits for mobile homes, by room and need
The Rellytech 9,000 BTU unit is the top pick for most mobile home rooms, while the rest of the list solves a specific layout or climate problem. Pick by the room you're treating and the circuit you can supply.
Rellytech Mini Split AC/Heating System: Best for most mobile home rooms
- 9,000 BTU cooling and heating
- 19 SEER2, HSPF2 8.5
- 115V inverter
- Up to 550 sq. ft
A 115V inverter system with heat pump and a 19 SEER2 rating, sized for a bedroom or a smaller living area in a manufactured home.
Pros
- 115V wiring
- 19 SEER2 with HSPF2 8.5
- Quiet 42 dB operation
- 8-year warranty
Cons
- 9,000 BTU only
- Professional installation required
Rellytech suits the typical mobile home bedroom or small living area. At 9,000 BTU it covers up to 550 sq. ft, and its 19 SEER2 rating with HSPF2 8.5 means the inverter compressor can hold a set temperature without cycling hard.
The system runs on 115V, so it can share the kind of circuit a manufactured home already has. Four fan speeds and a 90 degree vertical swing let you push air down a narrow room instead of across it.
It runs at 42 dB and has a sleep mode that adjusts temperature overnight.
Rellytech backs it with an 8-year warranty and lists ETL and AHRI certification. The trade-off is capacity: for a wide open living and dining area, step up to a 12,000 BTU unit.
Pick this one when you're treating one room and want the longest coverage and warranty in the group.
MEPTY 12000BTU Mini Split AC/Heating System: Best for larger mobile home living areas
- 12,000 BTU cooling and heating
- 19 SEER2
- 115V inverter
- Up to 750 sq. ft
More cooling capacity than the 9,000 BTU picks on the same 115V supply, so one unit can carry an open living and dining area.
Pros
- Covers up to 750 sq. ft
- 115V wiring
- 26 dB in mute mode
- 19 SEER2
Cons
- Not the quietest option here
- Remote control only
MEPTY is the pick when the room you're cooling is the main living space. At 12,000 BTU it covers up to 750 sq. ft, which fits an open living and dining area in a double-wide, and it still runs on 115V.
The 19 SEER2 inverter compressor saves energy by matching output to the load. MEPTY says its quick cool function reaches a cooler room in about 30 seconds and heat in about 60 seconds, and it pre-charges the condenser with R32 refrigerant.
Four modes, four fan speeds and an up-and-down swing keep air moving in a long, low room.
The mute mode drops noise to 26 dB, though the 26 dB figure applies to that setting rather than full output. A 24-hour timer and self-clean cycle help with daily use.
It's a straightforward remote-controlled system without app control, so skip it if you want to adjust it from your phone. Otherwise, it's the best 12,000 BTU value here for a living area.
Senville LETO 12000 BTU: Best for cold-climate mobile homes
- 12,000 BTU heat pump
- Alexa and app control
- Works down to 5F
- 16 ft line set included
A heat pump that Senville says keeps heating down to 5F, which matters when winter nights in a mobile home dip well below freezing.
Pros
- Heating rated to 5F
- Alexa and app control
- 16 ft line set included
- 5-year parts and compressor warranty
Cons
- Covers up to 700 sq. ft
- Professional installation required
Senville is the safest bet for a mobile home that sees real winters. Senville says its LETO heat pump keeps heating down to 5F, which matters when a manufactured home loses heat fast on a cold night.
It's a 12,000 BTU unit rated for up to 700 sq. ft. The 4-in-1 design covers cooling, heating, dehumidifying and fan, with a turbo setting for fast temperature changes.
Alexa and app control let you warm the place before you get home.
The kit includes the indoor air handler, the outdoor condenser and a 16 ft line set and communication wire, pre-loaded with refrigerant for up to 25 ft. Senville gives 5 years on parts and 5 years on the compressor.
It's not a low-temperature record holder against the Costway or Garvee units, but it's close and it has a 5-year warranty on parts and the compressor. Pick it if cold-weather heating is the priority.
Albott 12000 BTU 115V: Best for wide temperature swings
- 12,000 BTU cooling and heating
- 18 SEER2
- Runs from 5F to 122F
- Built-in WiFi
Built-in WiFi and an 18 SEER2 rating, with a wide 5F to 122F outdoor range for homes that see hot summers and cold snaps.
Pros
- Built-in WiFi and app control
- Runs from 5F to 122F
- 18 SEER2
- Quiet below 29 dB
Cons
- 18 SEER2 is below the leaders here
- Heavier outdoor unit at 151 lb
Albott suits a home that swings from hot summers to freezing snaps. It runs from 5F to 122F outdoors and covers up to 750 sq. ft, so the same unit handles July heat and a January cold front.
Built-in WiFi means you can set it from the app without adding a hub. The 18 SEER2 rating is lower than the 19 and 20 SEER2 units here, so it costs a little more to run over a season.
The trade-off is weight: the unit weighs 151 lb, heavier than most here, so plan the wall bracket or pad for that.
It runs below 29 dB and has self-clean and removable filters. Pick it when you want app control and a wide outdoor range in one package.
Pass it over if efficiency is your main goal or if lifting a heavy condenser onto a bracket is a problem.
Mountman 12000 BTU: Best for quiet bedrooms
- 12,000 BTU cooling and heating
- 19 SEER2
- 26 dB mute mode
- 110/120V
A 19 SEER2 inverter system with a 26 dB mute mode and self-cleaning cycle, suited to a bedroom that shares a wall with the living area.
Pros
- 19 SEER2
- 26 dB in mute mode
- Self-cleaning and auto-defrost
- 110/120V wiring
Cons
- 1-year protection is short
- No WiFi or app control
Mountman is the pick for a bedroom that shares a wall with the living room. Its mute mode runs at 26 dB, so the compressor and fan stay out of the way at night.
The 12,000 BTU unit is 19 SEER2 and runs on 110/120V. Four modes and four fan speeds, plus sleep and ECO settings, cover everyday comfort.
Self-cleaning and auto-defrost keep the indoor unit drier and the heat steady through winter.
The trade-off is support: Mountman lists only a 1-year protection period, shorter than the 5 to 8 years on the other picks. There's also no WiFi or app control.
Pick it when quiet operation matters more than remote access or a long warranty. For a small bedroom that only needs 9,000 BTU, the Rellytech or Garvee are better matches.
Rovsun 9000 BTU WiFi: Best for small single-wide bedrooms
- 9,000 BTU cooling and heating
- 20 SEER2
- WiFi, Alexa and Google Assistant
- Up to 450 sq. ft
The highest efficiency in this group at 20 SEER2, with app and voice control for a room that stays closed most of the day.
Pros
- 20 SEER2
- WiFi, Alexa and Google Assistant
- 115V wiring
- 28 dB in mute mode
Cons
- 9,000 BTU only
- Power cord not included
Rovsun suits a small single-wide bedroom that stays closed most of the day. At 9,000 BTU it covers up to 450 sq. ft, and its 20 SEER2 rating is the best efficiency in this group.
WiFi plus Alexa and Google Assistant control means you can cool the room before bed from your phone. Mute mode runs at 28 dB, quiet enough for a room next to the living area.
The kit includes a 16.4 ft copper line set and signal cord.
One detail to plan for: Rovsun says an extra power cord is needed. The unit also ships in two boxes that may arrive separately, so schedule the install after both land.
Pick it for a small, rarely open room where you want app control and the lowest running cost. A 12,000 BTU unit serves an open living area better.
Costway 12000 BTU 115V: Best for very hot or very cold climates
- 12,000 BTU cooling and heating
- 20 SEER2
- Heats at -4F, cools at 127F
- WiFi and voice control
A 20 SEER2 inverter unit with the widest outdoor range here and eight fan speeds for fine control in a long, narrow room.
Pros
- 20 SEER2
- Runs from -4F to 127F
- WiFi and voice control
- 8 fan speeds
Cons
- 4-way swing only
- Professional installation required
Costway is the pick when your climate goes to extremes. It heats at -4F and cools at 127F, the widest outdoor range here, so a mobile home in a desert or a mountain valley gets year-round use.
The 12,000 BTU unit is 20 SEER2 and covers up to 750 sq. ft. Seven modes and eight fan speeds give fine control, and the 4D airflow design spreads air more evenly in a long, narrow room.
WiFi and voice control work with Alexa and Google Assistant.
It runs as low as 28 dB and has a self-clean function and washable filters. The trade-off is airflow style: the swing is 4-way rather than the 90 degree vertical swing on the Rellytech.
Pick it when temperature extremes are the main worry. For milder climates, a 19 SEER2 unit like the MEPTY costs less to buy and runs about as cheaply.
YITAHOME 12000 BTU 220V: Best for homes with 220V service
- 12,000 BTU cooling and heating
- 17.5 SEER2
- 220V
- WiFi and voice control
A 220V system for a manufactured home that already has a dedicated 240V circuit available for heating and cooling.
Pros
- Runs on 220V service
- WiFi and voice control
- Self-diagnosis and auto-defrost
- R32 refrigerant
Cons
- 17.5 SEER2 is the lowest here
- Needs 220V wiring
- Noisiest unit in this group
YITAHOME suits a manufactured home that already has a 220V circuit free. It's a 12,000 BTU unit for up to 750 sq. ft, with WiFi and voice control plus five operating modes.
It handles 5F to 118F outdoors and uses R32 refrigerant. A self-diagnosis and self-clean cycle helps with maintenance, and the HEALTH mode adds negative ions and PM2.5 removal.
The kit includes indoor and outdoor units and a remote.
Three things hold it back against the 115V picks. Its 17.5 SEER2 is the lowest efficiency here, it's the noisiest unit in this group below 41 dB, and it needs 220V wiring.
If your panel has a spare 240V circuit and you want app control, it works. If you'd need to add the circuit, a 115V unit like the MEPTY saves money and install time.
Also note the outdoor wall bracket and shut-off valve cover aren't included.
Garvee 9000 BTU Remote: Best for tight budgets
- 9,000 BTU cooling and heating
- 19 SEER2
- Heats at -4F, cools at 140F
- 23 dB quiet mode
The quietest system here at 23 dB and the cheapest way into a 9,000 BTU heat pump, with a full install kit in the box.
Pros
- 23 dB quiet mode
- Runs from -4F to 140F
- Full installation kit included
- 115V wiring
Cons
- 9,000 BTU only
- Remote control only
- Lowest score in this group
Garvee is the budget entry into a 9,000 BTU heat pump. It covers up to 450 sq. ft and runs on 115V, so a spare bedroom or a small living area in a single-wide can take it without electrical work.
It's the quietest system here at 23 dB in quiet mode. It starts at -4F and runs to 140F outdoors, so it handles cold snaps and heat waves.
Six modes, an iFEEL sensor and a 24-hour timer cover daily use, and the box includes the indoor and outdoor units plus a full install kit with copper tubing and a mounting bracket.
The trade-off is control and refinement: it's remote only, with no WiFi or app. It also has the lowest score in this group, so expect fewer features than the leaders.
Pick it when the budget is tight and a small room needs cooling and heating. If you want app control in the same size, the Rovsun is the better buy.
How these mini splits compare
The table below puts the nine systems side by side on BTU, voltage, coverage and efficiency. Use it to narrow the list to units that fit your room and your electrical panel, then read the write-up for the one that fits.
| Product | Best for | Cooling power | Voltage | Coverage | Our score |
|---|---|---|---|---|---|
| Rellytech Mini Split AC/Heating System | most mobile home rooms | 9,000 BTU | 115V | Up to 550 sq. ft | 9.7 |
| MEPTY 12000BTU Mini Split AC/Heating System | larger mobile home living areas | 12,000 BTU | 115V | Up to 750 sq. ft | 9.0 |
| Senville LETO 12000 BTU | cold-climate mobile homes | 12,000 BTU | Up to 700 sq. ft | 8.9 | |
| Albott 12000 BTU 115V | wide temperature swings | 12,000 BTU | 115V | 8.2 | |
| Mountman 12000 BTU | quiet bedrooms | 12,000 BTU | 110/120V | 7.9 | |
| Rovsun 9000 BTU WiFi | small single-wide bedrooms | 9,000 BTU | 115V | Up to 450 sq. ft | 7.8 |
| Costway 12000 BTU 115V | very hot or very cold climates | 12,000 BTU | 115V | 7.6 | |
| YITAHOME 12000 BTU 220V | homes with 220V service | 12,000 BTU | 220V | 6.8 | |
| Garvee 9000 BTU Remote | tight budgets | 9,000 BTU | 115V | 6.6 |
How we compared these mini splits for mobile homes
We ranked these systems on the specs that decide whether a unit works in a manufactured home: BTU and coverage, voltage, SEER2 and heating range. A unit that needs 220V wiring scores lower for most buyers because it adds an electrician's bill to the install.
We also weighed what's in the box. A kit with a line set and mounting parts saves a separate shopping trip.
Efficiency came next, since a mobile home's thin walls make every running-cost saving matter. Warranty length and noise rounded out the ranking.
Our score weighs specs, features and buyer feedback against what you're shopping for. The highest score goes to the unit that fits the most mobile home rooms without a compromise.
What size mini split fits a mobile home?
Start with the square footage of the room you're treating, not the whole house. A 9,000 BTU unit covers about 450 to 550 sq. ft and a 12,000 BTU unit about 700 to 750 sq. ft.
In a single-wide, a 9,000 BTU unit in the living area often reaches the kitchen and hallway if doors stay open.
Measure each room's length and width and multiply them. A 14 x 60 ft single-wide is about 840 sq. ft total, but one room is usually 200 to 350 sq. ft.
That fits a 9,000 BTU unit. An open living and dining area in a double-wide can run 500 to 750 sq. ft, where a 12,000 BTU unit is the safer pick.
Oversizing wastes energy and short-cycles the compressor. Undersizing leaves the room warm on the hottest days.
For a room around 450 to 550 sq. ft, choose between the Rellytech and a 12,000 BTU unit based on how much sun the room gets. Our best 12000 BTU mini splits page covers the larger units in more detail.
Is one zone enough for a single-wide?
One zone is enough for the main living area. A single ductless head cools the space it faces and loses ground behind closed bedroom doors.
If bedrooms sit at the far end of the home, a second smaller unit serves them better than one oversized unit.
Should I size up for a hot climate?
Size up one step only if the room gets full afternoon sun or has little insulation. Otherwise match the listed coverage.
A 12,000 BTU unit in a 300 sq. ft bedroom cools fast but runs in short bursts, which is less efficient than a 9,000 BTU unit working steadily.
Which voltage does a mobile home mini split need?
Most mini splits for mobile homes run on 115V, which matches a standard household circuit. The Rellytech, MEPTY, Albott, Mountman, Rovsun and Garvee all list 115V or 110/120V.
The YITAHOME 12000 BTU needs 220V.
A dedicated circuit is the safe choice for any mini split. A ductless system pulls a steady current, and sharing a circuit with other appliances can trip the breaker.
Check your panel for a spare slot before you buy. A licensed electrician can confirm the circuit and run a new one if needed.
The 220V unit costs less to install only if the circuit already exists. If you'd need to add one, a 115V system like the MEPTY saves the electrician's bill.
Our best mini split for basement guide covers the same voltage question for below-grade rooms.
Can I run a mini split on an existing circuit?
Only if the circuit is dedicated and rated for the unit's draw. A mini split that shares a circuit with a water heater or dryer risks tripping the breaker.
Have an electrician check the panel before the installer arrives.
Is 220V better for heating?
Not by itself. A 220V unit like the YITAHOME lists the same 12,000 BTU heating capacity as the 115V units.
What matters for winter is the outdoor temperature rating, not the voltage.
How cold can a mobile home mini split run?
It depends on the unit's outdoor rating. Senville says its LETO heats down to 5F, the Garvee and Costway units list -4F, and the Albott and YITAHOME units run from 5F to 122F and 118F.
Check the rating against your area's coldest nights.
A mobile home loses heat faster than a stick-built house because its walls are thinner. That makes the heating rating more important than the cooling rating in most climates.
A unit that shuts off at 30F leaves you on a space heater for the coldest weeks.
The Costway unit has the widest range here at -4F to 127F. The Garvee matches the low end at -4F and reaches 140F.
Senville's 5F rating is close and backed by the longest warranty of the three. Our best mini splits for small rooms guide covers winter heating in smaller spaces.
Does a heat pump work below freezing?
Yes, when it's rated for it. Inverter heat pumps keep running below 32F and lose capacity as it gets colder.
A unit rated to -4F still heats on a 0F night, just at reduced output. Below its rating, the compressor stops or the backup heat takes over.
What if my area gets below the unit's rating?
Choose a unit with a lower rating or keep a backup heat source. A 220V unit won't fix a cold-climate gap; only the outdoor rating does.
Pick the Costway or Garvee if your winters regularly drop below 5F.
Can you install a mini split in a manufactured home?
Yes, a ductless mini split installs in a manufactured home with a few extra steps. The indoor air handler mounts on an interior wall, and the outdoor condenser sits on a pad or a wall bracket.
The main constraints are finding studs in thin walls, running the line set through the wall, and having the right electrical circuit.
Manufactured home walls are thinner than site-built ones. Use the mounting plate and bracket template in the kit and anchor into studs, not just the paneling.
Run the line set through a short wall sleeve and seal the opening with the putty in the kit so air doesn't leak.
Every unit here needs a licensed HVAC tech to pull a vacuum and check the refrigerant charge. Senville and Costway include a line set; Rovsun says a power cord is needed.
Budget for labor separately from the kit. Check the best mini split brands page for brands with wider service networks if you want easier local support.
Can I install it myself?
No, not safely. Refrigerant handling and the vacuum step need a licensed tech and the right gauges.
A self-install risks a leak and voids the warranty on most units.
Where should the outdoor unit go?
Put it on a pad or bracket outside the room it serves, with clearance for airflow. In a mobile home park, check the park rules on equipment placement and noise before the install day.
Which mini split is best for a mobile home bedroom?
A 9,000 BTU unit is the best fit for a mobile home bedroom. The Rellytech covers up to 550 sq. ft at 19 SEER2 and runs at 42 dB.
The Garvee is quieter at 23 dB and heats down to -4F. The Rovsun adds WiFi and 20 SEER2 for a smaller room.
Choose by room size and control. A 300 sq. ft bedroom in a single-wide fits any of the three 9,000 BTU units.
The Rellytech has the longest warranty at 8 years. The Garvee is the quietest and the cheapest.
The Rovsun offers app control and the best efficiency.
If the bedroom shares a wall with the living area, noise matters more than efficiency. The Garvee's 23 dB and the Mountman's 26 dB mute mode are the quietest options.
For app control in a small room, the Rovsun is the pick. Our best mini split for a small room guide covers more small-space choices.
What about a bedroom with a window AC now?
A mini split replaces the window unit and removes the noise and the window gap. It also heats, so it can replace a space heater in winter.
The install takes a wall mount and a line set through the wall, which a window unit doesn't need.
The verdict: the best mini split for mobile home rooms
The best mini split for a mobile home is the Rellytech 9,000 BTU unit for most rooms. It runs on 115V, covers up to 550 sq. ft at 19 SEER2, and backs it with an 8-year warranty.
Pick the MEPTY 12000BTU unit for a larger living area on the same 115V supply.
Go to the Senville LETO if winter heating matters most and you want heat down to 5F with a long warranty. Choose the Costway for the widest outdoor range at -4F to 127F, or the Garvee for the quietest 9,000 BTU unit on a tight budget.
Pick the YITAHOME only if your home already has a 220V circuit free.
Start by measuring the room you want to treat and checking the panel. Those two facts narrow the list faster than any feature comparison.
Then pick the unit whose coverage and voltage match your mobile home.
Our top 3 picks at a glance
-
1
Best for most mobile home roomsRellytech Mini Split AC/Heating System
9.7/10 our score
See it on Amazon -
2
Best for larger mobile home living areasMEPTY 12000BTU Mini Split AC/Heating System
9.0/10 our score
See it on Amazon -
3
Frequently asked questions
Does a mini split work in a mobile home in winter?
It does when the unit is rated for the outdoor temperature. Senville says its LETO heat pump heats down to 5F, and the Garvee and Costway units are rated to run down to -4F.
Check the rating against your area's coldest nights before you buy.
Do mini splits for mobile homes come with installation parts?
Most kits include the indoor and outdoor units, a line set and connecting cable. The Costway kit lists a 16.4 ft copper line set and remote.
A licensed HVAC tech still needs to pull a vacuum and check the charge, so budget for labor separately.
Can one mini split cool a whole single-wide?
A single unit cools the space it faces more than rooms behind closed doors. A 12,000 BTU unit rated for 750 sq. ft suits an open living and dining area.
For separate bedrooms at the far end, a second smaller unit works better than one oversized unit.
About this guide: Our look at mini splits for mobile homes draws on maker specs, materials and what owners report. See how we research.

