8 Best Ductless Mini Split Systems (November 2026)
The best best ductless mini split systems include the Rellytech Mini Split AC/Heating System for bedrooms and small rooms, the Rellytech 11500 BTU Mini Split AC/Heating System for cold-climate heating, and the Rellytech Mini Split AC/Heating System for a living room or office.
On this page (8 sections)
- Best ductless mini split systems for every room size
- How the best ductless mini split systems compare
- How these ductless mini split systems were compared
- Which BTU size fits your room?
- How much do efficiency ratings matter?
- Do you need 115V or 220V power?
- What should you know before installation?
- Which ductless mini split should you buy?
The best ductless mini split system for most homes is the Rellytech 9,000 BTU unit, which pairs a 19 SEER2 rating with a low 42 dB noise level and covers up to 450 sq. ft. on standard 115V power. For a colder climate, the Rellytech 11,500 BTU model heats down to -4°F.
For a large open-plan room, the YITAHOME 24,000 BTU covers up to 1,500 sq. ft.
A ductless mini split is a heat pump split into two parts: an indoor head on your wall and an outdoor compressor. It cools and heats without ductwork, so you can condition a room that a central system never reached.
That flexibility is why these systems keep showing up in additions, garages and converted attics.
This guide ranks eight ductless mini split systems by how well their specs fit real rooms. It covers coverage, efficiency, noise and the installation details that decide whether a unit is right for your wall.
If you are new to the category, read our ductless mini split guide first.
Our picks at a glance
-
1
Best for bedrooms and small roomsRellytech Mini Split AC/Heating System
9.7/10 our score
See it on Amazon -
2
Best for cold-climate heatingRellytech 11500 BTU Mini Split AC/Heating System
9.6/10 our score
See it on Amazon -
3
Best for a living room or officeRellytech Mini Split AC/Heating System
9.3/10 our score
See it on Amazon
Best ductless mini split systems for every room size
The top pick wins on balance: strong efficiency, quiet running and a full install kit in one 9,000 BTU package. The rest of the list is organized around specific needs, from cold winters to large living areas and tight budgets.
Read each write-up for the room it fits best.
Rellytech Mini Split AC/Heating System: Best for bedrooms and small rooms
- 9,000 BTU cooling and heating
- 19 SEER2, HSPF2 8.5
- 115V, covers up to 450 sq. ft.
- 42 dB operating noise
A 115V inverter system with a strong efficiency rating and a full install kit, sized for a single bedroom or home office.
Pros
- 19 SEER2 with an 8.5 HSPF2 heating rating
- Low 42 dB noise for a bedroom
- 8-year warranty and ETL/AHRI certified
Cons
- Only covers up to 450 sq. ft.
- Needs a licensed HVAC installer
Rellytech's 9,000 BTU system is the pick for a single bedroom, home office or small living room. It cools and heats up to 450 sq. ft. and carries a 19 SEER2 rating with HSPF2 8.5, so winter heating is nearly as efficient as summer cooling.
At 42 dB it runs quietly enough for a bedroom, and sleep mode nudges the set temperature through the night. The remote covers four fan speeds and a 90° vertical swing, so you can point air away from a bed or desk.
The cooling and heating range runs from 61°F to 88°F, and Eco mode trims energy use in both directions. Its rated annual consumption is 907 kWh per year.
The install kit includes the indoor and outdoor units, two 9.84 ft connecting pipes, a 12.5 ft communication cable and mounting hardware. Rellytech backs it with an 8-year warranty, and the unit is ETL and AHRI certified.
Professional installation is required.
Its trade-off against the others here is coverage. If your room runs past 450 sq. ft., step up to the 12,000 BTU Rellytech below.
For everything smaller, this is the system to beat.
Rellytech 11500 BTU Mini Split AC/Heating System: Best for cold-climate heating
- 11,500 BTU, covers up to 550 sq. ft.
- Heats down to -4°F with auto-defrost
- 29 dB quiet mode
- 115V hardwired
Built for cold winters, with low-temperature heating to -4°F and a 29 dB quiet mode.
Pros
- Heats reliably down to -4°F
- 29 dB quiet mode
- One-touch self-clean and 4D swing
Cons
- 17 SEER2 is lower than the top pick
- Hardwired setup, not plug-and-play
The 11,500 BTU Rellytech is the cold-climate choice. It heats reliably down to -4°F with auto-defrost and keeps cooling at outdoor temperatures up to 122°F.
If your winters dip well below freezing, this is the unit that keeps going.
At 29 dB it runs quietly, though the Garvee's 23 dB is the lowest figure in this group. Sleep mode and a screen-off function help light sleepers.
A one-touch self-clean cycle dries the coil to cut stale odors, and the filter pops out without tools for a rinse.
The 4D louvers move vertically and horizontally, and iFEEL reads temperature from the remote at your seat rather than from the wall head. Read our quiet mini split guide if noise is your main worry.
The trade-off is efficiency. Its 17 SEER2 rating trails the 19 SEER2 units here, so it uses a bit more power per BTU over a season, and its rated annual use is 1367 kWh.
That is a fair swap for heating that holds up in real cold. It runs on 115V household power but needs hardwiring, and vacuum-pumping is required before startup.
It ships in two packages and carries a 5-year limited warranty.
Rellytech Mini Split AC/Heating System: Best for a living room or office
- 12,000 BTU cooling, 12,500 BTU heating
- 19 SEER2, HSPF2 8.5
- Covers up to 750 sq. ft.
- 42 dB operating noise
The step up in coverage from the top pick, keeping 19 SEER2 efficiency for a larger bedroom or open office.
Pros
- Covers up to 750 sq. ft.
- 19 SEER2 and HSPF2 8.5
- 8-year warranty
Cons
- Heavier unit at 92 lb
- Needs professional install
This 12,000 BTU Rellytech is the right size for a living room or an office where the top pick would run short. It delivers 12,000 BTU cooling and 12,500 BTU heating across up to 750 sq. ft., and it keeps the 19 SEER2 rating and 8.5 HSPF2 from the smaller model.
The cooling and heating range matches at 61°F to 88°F.
The same remote, four fan speeds and sleep mode carry over, so daily use feels familiar. At 42 dB it is quiet enough for a workspace, though not as hushed as the 29 dB model above.
The install kit includes pipes, cable and mounting hardware. Its rated annual consumption is 1367 kWh per year.
The real difference is weight. The listed item weight is 92 lb, versus 66.4 lb for the 9,000 BTU model, so plan the wall mount and the lift carefully.
The coverage is what you pay for, and it makes this the practical pick for the main room of a small home. An 8-year warranty covers it.
MEPTY 12000BTU Mini Split AC/Heating System: Best for quiet operation
- 12,000 BTU, covers up to 750 sq. ft.
- 19 SEER2
- 26 dB mute mode
- Self-clean function
A 12,000 BTU system with a 26 dB mute mode and self-clean cycle, good for a bedroom or light commercial room.
Pros
- 26 dB mute mode
- 19 SEER2 efficiency
- Self-clean reduces moisture and odor
Cons
- Shorter warranty coverage than the top Rellytech picks
- Requires a licensed installer
MEPTY's 12,000 BTU system is a strong pick when quiet running matters more than a long warranty. Its mute mode drops to 26 dB, and the self-clean function dries the indoor unit to limit moisture and odor between cleanings.
It covers up to 750 sq. ft. with a 19 SEER2 inverter compressor. The four modes cover cooling, heating, fan and dehumidifying, with four fan speeds and an up-and-down swing that spreads air across the room.
A 24-hour timer lets you set auto-off around your schedule. The built-in dehumidifying mode pulls excess moisture from the air, which helps in humid rooms.
MEPTY says the unit reaches a cool room in about 30 seconds and a warm one in about 60 seconds. It uses R32 refrigerant.
The temperature range runs from 61°F to 88°F.
Against the top picks, it gives up some warranty coverage and the 8-year term that Rellytech offers. It also has no WiFi or app control.
If you want the quietest bedroom unit on a 12,000 BTU budget, though, it earns its spot.
Mountman 12000 BTU: Best for apartments and rentals
- 12,000 BTU, covers up to 750 sq. ft.
- 19 SEER2
- 26 dB sleep mode
- 110/120V
A 110/120V 12,000 BTU unit with self-clean and auto-defrost, sized for a rental where a standard circuit is the limit.
Pros
- Standard 110/120V power
- 19 SEER2
- Self-clean and auto-defrost
Cons
- 1-year protection only
- Fewer smart controls than the YITAHOME units
Mountman's 12,000 BTU unit fits apartments and rentals where a standard 110/120V circuit is the hard limit. It cools up to 750 sq. ft. at 19 SEER2, with four modes and four fan speeds, plus a sleep mode at 26 dB.
It also adds a Turbo Boost for faster cooling and heating.
Self-clean and auto-defrost keep maintenance low, and a washable anti-dust filter rinses clean each month. The remote's display shuts off after 10 seconds so it does not glow in a dark bedroom.
A 24-hour timer lets you match the schedule you already keep.
The honest trade-off is support. Mountman offers a 1-year protection plan, well short of the 8-year warranty on the top Rellytech models.
It also skips the WiFi and app control found on the YITAHOME units. Its compressor is a rotary type and it uses R32 refrigerant.
Choose it when the circuit matters most and you want a quiet, simple system. For a long-term primary unit in an owned home, the longer warranty on the Rellytech picks is the safer buy.
YITAHOME 24000 BTU 230V: Best for large open living areas
- 24,000 BTU, covers up to 1,500 sq. ft.
- 18.5 SEER2
- WiFi and Alexa control
- 25 dB in sleep mode
The biggest capacity here, with smart control and a 25 dB sleep mode, for a large open-plan room.
Pros
- Covers up to 1,500 sq. ft.
- WiFi and Alexa voice control
- 25 dB in sleep mode
Cons
- 230V wiring, not a standard outlet
- Heaviest system here at 116.9 lb
YITAHOME's 24,000 BTU system is the pick for a large open-plan living area, an addition or a light commercial room. It heats and cools up to 1,500 sq. ft. and runs on 230V, with WiFi, Alexa voice control and six modes including Eco.
Its 18.5 SEER2 rating is the second strongest on this list after the 19 SEER2 units.
At 25 dB in sleep mode it stays quiet in a big shared room. The unit also offers a 0 to 24-hour timer, display-off, self-diagnosis and self-clean, plus 4D air circulation and airflow that reaches up to 50 ft.
It runs from 5°F to 118°F outdoors. Its rated annual consumption is 1200 kWh.
Its trade-offs are wiring and weight. The 230V requirement means a dedicated circuit, so budget for an electrician along with the HVAC installer.
The system's listed weight is 116.9 lb for both units, the heaviest here, so the wall mount needs real planning.
For a big space where one head has to do the whole job, that coverage and smart control make it the pick.
YITAHOME 12000 BTU 220V: Best for smart-home control on a budget
- 12,000 BTU, covers up to 750 sq. ft.
- 17.5 SEER2
- WiFi and app control
- Below 41 dB
A 220V 12,000 BTU system with app and voice control, a fit for a smaller smart home where WiFi matters more than the top efficiency.
Pros
- WiFi and app control
- Covers up to 750 sq. ft.
- HEALTH mode with PM2.5 removal
Cons
- 17.5 SEER2 trails the top picks
- Runs on 220V, so check your panel first
This 220V YITAHOME unit suits a smaller smart home where app and voice control matter more than the top efficiency. It covers up to 750 sq. ft. at 17.5 SEER2, with WiFi, app and voice control across five modes.
Its rated annual consumption is 600 kWh, the lowest figure in this group.
The unit includes a HEALTH mode with negative ions, electrostatic dust removal and PM2.5 filtration. Noise stays below 41 dB, so it is better suited to a living room than a whisper-quiet bedroom.
It also adds iFEEL mode and a 24-hour timer. The set temperature runs from 60°F to 90°F.
The trade-offs are real. At 17.5 SEER2 it trails the 19 SEER2 units here, and 220V wiring is a step up from a standard outlet.
It also runs louder than the 26 to 29 dB models above. The outdoor wall bracket and valve covers are not included, so factor those in.
Pick it when you want Alexa or app control and your panel already has 220V service. If quiet and efficiency come first, the 12,000 BTU Rellytech or MEPTY fit better.
Garvee 9000 BTU Remote: Best for garages and workshops
- 9,000 BTU, covers up to 450 sq. ft.
- 19 SEER2
- Heating down to -4°F
- 23 dB quiet mode
A 19 SEER2 9,000 BTU unit rated for low-temperature startup to -4°F and steady running to 140°F, built for tough spaces.
Pros
- 19 SEER2 efficiency
- Low-temperature startup to -4°F
- 23 dB quiet mode
Cons
- Smallest coverage at 450 sq. ft.
- Best saved for garages and workshops, not main living rooms
Garvee's 9,000 BTU unit is built for garages, workshops and other tough spaces. It starts at low temperatures down to -4°F and runs continuously up to 140°F, with anti-dead-wind design for steady operation.
It covers up to 450 sq. ft. and heats at 10,000 BTU.
At 23 dB it is the quietest unit on paper in this group. Six modes include Eco and Auto, and the backlit remote carries an iFEEL sensor and a 24-hour timer.
The unit also adds negative ions, electrostatic dust filtration and PM2.5 removal for cleaner air, plus automatic defrost and self-diagnosis.
The install kit is complete, with the indoor and outdoor units, copper tubing, mounting bracket and sealing putty. Garvee asks you to keep the unit upright for 24 hours before installation and to use a licensed HVAC technician.
It is ETL and AHRI certified. The unit ships in two packages that may arrive separately.
The catch is coverage: 450 sq. ft. is the smallest here. Save this one for a garage or workshop where temperature swings are wide and size is not.
For a main living space, a larger BTU model serves you better.
How the best ductless mini split systems compare
The table below lines up capacity, efficiency, coverage and voltage so you can see where each system lands. A higher SEER2 means lower running costs per BTU, and coverage tells you the largest room each unit suits.
| Product | Best for | Capacity | Efficiency | Coverage | Our score |
|---|---|---|---|---|---|
| Rellytech Mini Split AC/Heating System | bedrooms and small rooms | 9000 BTU | 19 SEER2 | 450 sq. ft. | 9.7 |
| Rellytech 11500 BTU Mini Split AC/Heating System | cold-climate heating | 11500 BTU | 17 SEER2 | 550 sq. ft. | 9.6 |
| Rellytech Mini Split AC/Heating System | a living room or office | 12000 BTU | 19 SEER2 | 750 sq. ft. | 9.3 |
| MEPTY 12000BTU Mini Split AC/Heating System | quiet operation | 12000 BTU | 19 SEER2 | 750 sq. ft. | 9.0 |
| Mountman 12000 BTU | apartments and rentals | 12000 BTU | 19 SEER2 | 750 sq. ft. | 7.9 |
| YITAHOME 24000 BTU 230V | large open living areas | 24000 BTU | 18.5 SEER2 | 1500 sq. ft. | 7.3 |
| YITAHOME 12000 BTU 220V | smart-home control on a budget | 12000 BTU | 17.5 SEER2 | 750 sq. ft. | 6.8 |
| Garvee 9000 BTU Remote | garages and workshops | 9000 BTU | 19 SEER2 | 450 sq. ft. | 6.6 |
The top three units all reach 19 SEER2 or better, but they split on coverage and cold-weather heating. The 9,000 BTU Rellytech covers the smallest area, the 12,000 BTU Rellytech and MEPTY handle 750 sq. ft., and the YITAHOME 24,000 BTU handles the largest rooms at the cost of a 230V circuit.
The 11,500 BTU Rellytech trades a little efficiency for heating down to -4°F. Lower on the list, Mountman offers 110/120V simplicity with a short warranty, while Garvee packs 19 SEER2 into a garage-ready shell.
The YITAHOME 12,000 BTU is the outlier on efficiency at 17.5 SEER2, but its 600 kWh annual figure and smart controls still earn a place.
How these ductless mini split systems were compared
We ranked these systems by matching their published specs to what buyers actually need: the right BTU for the room, a strong SEER2 rating, low noise and a realistic install path. Our score weighs specs, features and buyer feedback against what you're shopping for.
Efficiency carried the most weight. A system rated 19 SEER2 costs less to run than a 17 SEER2 unit over a season, and the HSPF2 heating figure matters just as much in cold climates.
Noise came next, since a bedroom unit at 42 dB and one at 26 dB feel different at night. Then came coverage, voltage and what ships in the box.
A system that needs 230V wiring or a separate electrician is a bigger project than a 115V unit. Warranty length broke close calls.
Read how does a mini split work if you want the mechanics behind these numbers.
Which BTU size fits your room?
Start with square footage and add headroom for sun or poor insulation. A 9,000 BTU unit suits a room up to about 450 to 550 sq. ft., 12,000 BTU reaches 750 sq. ft., and 24,000 BTU covers close to 1,500 sq. ft.
A sunny south-facing room or a poorly insulated garage runs warmer, so size up rather than down. An oversized unit short-cycles and struggles to pull humidity out of the air.
Small rooms and bedrooms
Go with a 9,000 BTU unit for a bedroom or small office. The Rellytech 9,000 BTU covers up to 450 sq. ft. at 19 SEER2 and 42 dB.
The Garvee 9,000 BTU covers 450 sq. ft. and handles wider temperature swings.
Living rooms and offices
Step to 12,000 BTU for a main living area. The Rellytech 12,000 BTU and MEPTY 12,000 BTU both cover 750 sq. ft. at 19 SEER2.
MEPTY runs quieter in mute mode, while Rellytech carries the longer warranty. The Mountman 12,000 BTU is the third option here, best kept for a rental.
Large open-plan spaces
Choose 24,000 BTU for an open-plan room or addition near 1,500 sq. ft. The YITAHOME 24,000 BTU is the only unit here at that size, with 230V power and smart controls.
It also offers the widest airflow, reaching up to 50 ft.
How much do efficiency ratings matter?
Efficiency decides your monthly bill more than any other spec. SEER2 measures cooling efficiency and HSPF2 measures heating efficiency.
A 19 SEER2 unit costs less to run per BTU than a 17.5 SEER2 model, and the gap grows the more hours you run it. Most units here use R32 refrigerant.
For a closer look at running costs, read do mini splits use a lot of electricity.
What SEER2 means in daily use
SEER2 is the seasonal efficiency ratio, measured over a full cooling season. A 19 SEER2 system moves more heat per unit of electricity than a 14 SEER2 model.
Over a long summer in a warm climate, that adds up to real savings. Rellytech rates the 9,000 BTU unit at 907 kWh per year and the 11,500 BTU unit at 1367 kWh, so even within one brand the figure follows the size and efficiency of the model.
Heating efficiency and cold weather
HSPF2 covers heating. The top Rellytech units carry HSPF2 8.5, and the 11,500 BTU model heats down to -4°F with auto-defrost.
In a mild climate, standard efficiency is plenty. In a cold one, low-temperature heating matters more than a higher SEER2.
The YITAHOME units handle 5°F to 118°F outdoors, while the Garvee runs down to -4°F and up to 140°F.
Do you need 115V or 220V power?
Check your electrical panel before you pick a system. A 115V unit runs on standard household power and needs hardwiring, not a plug.
A 220V or 230V unit needs a dedicated circuit. The 9,000 and 11,500 BTU Rellytech models run on 115V.
The YITAHOME 24,000 BTU needs 230V, and the YITAHOME 12,000 BTU needs 220V. If your panel lacks a spare 220V breaker, the 115V units are the simpler install and may save you an electrician's bill.
What should you know before installation?
Every system here needs a licensed HVAC technician. The units ship pre-charged with refrigerant and include an install kit, but vacuum-pumping, refrigerant handling and secure wall mounting still take a pro.
Two practical points: keep the unit upright for 24 hours before installation, and expect the indoor and outdoor units to ship in separate packages that may arrive on different days. Budget for the install as part of the total cost.
A professional install gets the refrigerant charge right. Line lengths vary too: the Rellytech units ship with 9.84 ft pipes, while the 11,500 BTU model includes a 16.4 ft line set, so measure the run from the wall head to the outdoor unit before the technician arrives.
Which ductless mini split should you buy?
Buy the 9,000 BTU Rellytech for a single bedroom or small room, because its 19 SEER2 rating, 42 dB noise and 8-year warranty make it the best all-round ductless mini split system for most homes. Choose the 11,500 BTU Rellytech if your winters drop well below freezing, since it heats down to -4°F.
Pick the 12,000 BTU Rellytech or MEPTY for a living room or office up to 750 sq. ft. The YITAHOME 24,000 BTU covers the largest open-plan rooms, as long as you have 230V service.
For a rental on a standard circuit, the Mountman 12000 BTU fits. If you are still weighing the category as a whole, our ductless mini split guide walks through the rest.
Our top 3 picks at a glance
-
1
Best for bedrooms and small roomsRellytech Mini Split AC/Heating System
9.7/10 our score
See it on Amazon -
2
Best for cold-climate heatingRellytech 11500 BTU Mini Split AC/Heating System
9.6/10 our score
See it on Amazon -
3
Best for a living room or officeRellytech Mini Split AC/Heating System
9.3/10 our score
See it on Amazon
Frequently asked questions
What size ductless mini split do I need?
Match BTU to square footage: 9,000 BTU for rooms up to about 450 to 550 sq. ft., 12,000 BTU for up to 750 sq. ft., and 24,000 BTU for spaces near 1,500 sq. ft. Add a little headroom for a sunny or poorly insulated room.
Do ductless mini splits heat as well as they cool?
Yes. Every system here is a heat pump with a heating mode, and the Rellytech 11,500 BTU model heats down to -4°F.
Heating output drops in extreme cold, so match the unit to your winter lows.
Can I install a mini split myself?
These units require licensed HVAC installation. The lines are pre-charged, but you still need vacuum-pumping, refrigerant handling and secure wall mounting.
Plan for a professional install from the start.
Are ductless mini splits quiet enough for a bedroom?
Yes. Quiet modes here range from 23 dB to 42 dB, and many sit in the 25 to 29 dB range.
That is quieter than a typical window air conditioner, though outdoor compressor noise varies by model.
How much electricity does a ductless mini split use?
Efficiency is measured in SEER2, and the units here range from 17 SEER2 to 19 SEER2. Rellytech rates the 9,000 BTU model at around 907 kWh per year.
Real use depends on climate and how often it runs.
What voltage do these mini splits need?
Some run on standard 115V household power and others need 220V or 230V. The 9,000 and 11,500 BTU Rellytech units are 115V, while the YITAHOME 24,000 BTU needs 230V.
Check your panel before you buy.
About this guide: Our look at best ductless mini split systems draws on maker specs, materials and what owners report. See how we research.



